|
Design of Reinforced Concrete Floor Systems
|
Item Code: RP434
Date of Publication: 2006
Price: $0.00
|
|
This reprint from the September 2005 issue of Structural Engineer Magazine is a part of the PCA Professional Development Series. Each part of the series gives the reader an opportunity to earn continuing education credit by reading a specially focused, sponsored article. Upon reading this article and completing the quiz, the reader should be able to learn methods of analysis and design for reinforced concrete of floor systems in accordance with The American Concrete Institute’s Building Code Requirements for Structural Concrete (ACI 318-05). The quiz answers are graded by the Professional Development Series sponsor. If the correct answers are at least 80 percent of the questions, the participant will receive a certificate of completion from the Professional Development Series sponsor within 90 days and will be awarded 1.0 professional development hour (equivalent to 0.1 continuing education unit in most states). Note: It is the responsibility of the licensee to determine if this method of continuing education meets his or her governing board(s) of registration’s requirements.
Click for more
|
|
|
Engineering Mass Concrete Structures
|
Item Code: RP437
Date of Publication: 2006
Price: $0.00
|
|
This reprint from the November 2006 issue of Structural Engineer Magazine is a part of the PCA Professional Development Series. Each part of the series gives the reader an opportunity to earn continuing education credit by reading specially focused, sponsored article. Upon reading this article and completing the quiz, the reader will learn how to minimize the likelihood of cracking and improve the durability of mass concrete by optimizing the mix design, as well as predicting, monitoring, and controlling concrete temperatures. The quiz answers are graded by the Professional Development Series sponsor. If the correct answers are at least 80 percent of the questions, the participant will receive a certificate of completion from the Professional Development Series sponsor within 90 days and will be awarded 1.0 professional development hour (equivalent to 0.1 continuing education unit in most states).
Note: It is the responsibility of the licensee to determine if this method of continuing education meets his or her governing board(s) of registration’s requirements.
Click for more
|
|
|
Post-Tensioning for Two-Way Flat Plate Construction
|
Item Code: RP435
Date of Publication: 2006
Price: $0.00
|
|
This reprint from the October 2005 issue of Structural Engineer Magazine is a part of the PCA Professional Development Series. Each part of the series gives the reader an opportunity to earn continuing education credit by reading specially focused, sponsored article. Upon reading this article and completing the quiz, the reader should be able to understand the design process for post-tensioned two-way slabs and recognize constructability issues involved when using a posttensioning system. The quiz answers are graded by the Professional Development Series sponsor. If the correct answers are at least 80 percent of the questions, the participant will receive a certificate of completion from the Professional Development Series sponsor within 90 days and will be awarded 1.0 professional development hour (equivalent to 0.1 continuing education unit in most states).
Note: It is the responsibility of the licensee to determine if this method of continuing education meets his or her governing board(s) of registration’s requirements.
Click for more
|
|
|
|
QUIZ 1 Module 1 “Beams and One-way Slabs”
|
Item Code: CEU001
Date of Publication: 2008
Price: $60.00
|
|
The PCA web-based quizzes are a unique opportunity to earn continuing education credit. These quizzes are based on “Reinforced Concrete Design – Distance Learning Modules DVD” (DVD005). If you watch the narrated lessons on the DVD, display your understanding of the stated learning objectives, and follow the simple instructions of taking the quiz, you can fulfill a portion of your continuing education requirements.
This quiz is based on Module 1 “Beams and One-way Slabs.” If you answer at least 80 percent of the questions correctly, you receive Portland Cement Association Certificate of Completion and will be awarded 2.0 Professional Development Hours (equivalent to 0.2 Continuing Education Units in most states).
Note: It is the responsibility of the engineer to determine if this method of continuing education meets the state registration’s requirements.
Click for more
|
|
|
|
QUIZ 2 Module 2 “Columns”
|
Item Code: CEU002
Date of Publication: 2008
Price: $60.00
|
|
The PCA web-based quizzes are a unique opportunity to earn continuing education credit. These quizzes are based on “Reinforced Concrete Design – Distance Learning Modules DVD” (DVD005). If you watch the narrated lessons on the DVD, display your understanding of the stated learning objectives, and follow the simple instructions of taking the quiz, you can fulfill a portion of your continuing education requirements.
This quiz is based on Module 2 “Columns.” If you answer at least 80 percent of the questions correctly, you receive Portland Cement Association Certificate of Completion and will be awarded 3.0 Professional Development Hours (equivalent to 0.3 Continuing Education Units in most states).
Note: It is the responsibility of the engineer to determine if this method of continuing education meets the state registration’s requirements.
Click for more
|
|
|
|
QUIZ 3 Module 3 “Two-way Slabs”
|
Item Code: CEU003
Date of Publication: 2008
Price: $60.00
|
|
The PCA web-based quizzes are a unique opportunity to earn continuing education credit. These quizzes are based on “Reinforced Concrete Design – Distance Learning Modules DVD” (DVD005). If you watch the narrated lessons on the DVD, display your understanding of the stated learning objectives, and follow the simple instructions of taking the quiz, you can fulfill a portion of your continuing education requirements.
This quiz is based on Module 3 “Two-way Slabs.” If you answer at least 80 percent of the questions correctly, you receive Portland Cement Association Certificate of Completion and will be awarded 3.0 Professional Development Hours (equivalent to 0.3 Continuing Education Units in most states).
Note: It is the responsibility of the engineer to determine if this method of continuing education meets the state registration’s requirements.
Click for more
|
|
|
|
QUIZ 4 Module 4 “Walls”
|
Item Code: CEU004
Date of Publication: 2008
Price: $40.00
|
|
The PCA web-based quizzes are a unique opportunity to earn continuing education credit. These quizzes are based on “Reinforced Concrete Design – Distance Learning Modules DVD” (DVD005). If you watch the narrated lessons on the DVD, display your understanding of the stated learning objectives, and follow the simple instructions of taking the quiz, you can fulfill a portion of your continuing education requirements.
This quiz is based on Module 4 “Walls.” If you answer at least 80 percent of the questions correctly, you receive Portland Cement Association Certificate of Completion and will be awarded 2.0 Professional Development Hours (equivalent to 0.2 Continuing Education Units in most states).
Note: It is the responsibility of the engineer to determine if this method of continuing education meets the state registration’s requirements.
Click for more
|
|
|
|
QUIZ 5 Module 5 “Foundations”
|
Item Code: CEU005
Date of Publication: 2008
Price: $40.00
|
|
The PCA web-based quizzes are a unique opportunity to earn continuing education credit. These quizzes are based on “Reinforced Concrete Design – Distance Learning Modules DVD” (DVD005). If you watch the narrated lessons on the DVD, display your understanding of the stated learning objectives, and follow the simple instructions of taking the quiz, you can fulfill a portion of your continuing education requirements.
This quiz is based on Module 5 “Foundations.” If you answer at least 80 percent of the questions correctly, you receive Portland Cement Association Certificate of Completion and will be awarded 2.0 Professional Development Hours (equivalent to 0.2 Continuing Education Units in most states).
Note: It is the responsibility of the engineer to determine if this method of continuing education meets the state registration’s requirements.
Click for more
|
|
|
Structural Integrity Requirements for Concrete Buildings
|
Item Code: RP436
Date of Publication: 2006
Price: $0.00
|
|
This reprint from the September 2006 issue of Structural Engineer Magazine is a part of the PCA Professional Development Series. Each part of the series gives the reader an opportunity to earn continuing education credit by reading specially focused, sponsored article. Upon reading this article and completing the quiz, the reader should be able to understand the structural integrity requirements for reinforced concrete buildings in accordance with the American Concrete Institute’s Building Code Requirements for Structural Concrete (ACI 318-05). The reader will learn the detailing provisions to achieve structural integrity for cast-in-place joists, beams, two-way slabs, lift slabs, and precast concrete construction. The quiz answers are graded by the Professional Development Series sponsor. If the correct answers are at least 80 percent of the questions, the participant will receive a certificate of completion from the Professional Development Series sponsor within 90 days and will be awarded 1.0 professional development hour (equivalent to 0.1 continuing education unit in most states).
Note: It is the responsibility of the licensee to determine if this method of continuing education meets his or her governing board(s) of registration’s requirements.
Click for more
|
|
|
Strut-and-Tie Model for Structural Concrete Design
|
Item Code: RP439
Date of Publication: 2007
Price: $0.00
|
|
This reprint from the October 2007 issue of Structural Engineer magazine is a part of the PCA Professional Development Series. Each part of the series gives the reader an opportunity to earn continuing education credit by reading specially focused, sponsored article. This article discusses the strut-and-tie model in concrete structures. Upon reading the article and completing the quiz, the reader should be able to understand the basic principles and the related ACI 318-05 Code requirements. The quiz answers are graded by the Professional Development Series sponsor. If the correct answers are at least 80 percent of the questions, the participant will receive a certificate of completion from the Professional Development Series sponsor within 90 days and will be awarded 1.0 professional development hour (equivalent to 0.1 continuing education unit in most states). Note: It is the responsibility of the licensee to determine if this method of continuing education meets his or her governing board(s) of registration’s requirements.
Click for more
|
|
|
Torsion Design of Structural Concrete Based on ACI 318-05
|
Item Code: RP438
Date of Publication: 2007
Price: $0.00
|
|
This reprint from the September 2007 issue of Structural Engineer Magazine is a part of the PCA Professional Development Series. Each part of the series gives the reader an opportunity to earn continuing education credit by reading a specially focused, sponsored article. Upon reading the article and completing the quiz, the reader should be able to understand the behavior and design of structural concrete members subjected to torsion. The article presents the American Concrete Institute’s Building Code (ACI 318-05) design provisions and detailing requirements for torsion design. The quiz answers are graded by the Professional Development Series sponsor. If the correct answers are at least 80 percent of the questions, the participant will receive a certificate of completion from the Professional Development Series sponsor within 90 days and will be awarded 1.0 professional development hour (equivalent to 0.1 continuing education unit in most states). Note: It is the responsibility of the licensee to determine if this method of continuing education meets his or her governing board(s) of registration’s requirements.
Click for more
|
|